DrumDial quickly and precisely tunes all drums by accurately measuring drumhead tension NOT tension rod torque. Tension rod torque can be used to tell you when you are over tightening a bolt to prevent thread damage, but is not accurate for drum tuning because of the difference in screw tolerances, plating, corrosion, and thread wear. You can eliminate these problems by using a DrumDial to measure drumhead tension directly from the drumhead, allowing you to precisely tune your drums faster and easier than ever before. DrumDial has been designed and manufactured to the highest quality standards with all the key features you would expect from the best drum tuner available. Get the tuner that really works, get a DrumDial and make it possible for your drums to consistently sound great!

ADDD | Digital drum dial
ADD | Classic drum dial

Remove one side of the backing from the double-sided tape and attach it to the flat side of the trigger element. Remove the other side of the backing and attach the trigger element to the drumhead about ¾” from the rim near a tuning lug.

Attach the ¼” jack to the drum by using the mounting clip or Velcro tape.

Using the mounting clip: remove a tension screw at the desired mounting point, place the ¼” jack into the clip and mount it to the drum lug by inserting the tension screw through the clip and rim. Then tighten as needed.

Using Velcro tape: remove one side of the adhesive backing and attach it to the ¼” jack. Remove the other side of the adhesive backing, attach it to the drum shell or rim at a convenient location and press the Velcro halves together.

Connect the drum trigger to your drum module and properly adjust the module’s parameters (sensitivity, gain, threshold, noise, etc.) and volume.

The DrumDial drum trigger is an extremely sensitive, heavy duty, long lasting alternative to electronically trigger your acoustic drum set. DrumDial drum triggers are compatible with any electronic drum module and comes standard with a quality-insulated cable, ¼” input jack, mounting tape, Velcro fastener and a cable mounting bracket. Our drum triggers are set in Mil-spec Electro-mechanical grade epoxy and then sealed in rubber to insure unsurpassed reliability. Great for your snare, kick or toms. Purchase them one at a time or in sets of five.

Strengthens and conditions the bearing edge for fast, easy tuning!

Strengthens and conditions the top of the bearing edge where it contacts the drum head. Solid stick, comes in an easy to use twist tube for a no mess application. This is not a wax, soap or a petroleum product. It allows the drum head to glide smoothly over the bearing edge without effecting the sound of the drum. Waxes, soaps and petroleum products (ski wax etc.) deaden the drum head and effect the natural sound of the drum.

Made from a proprietary blend of extreme high pressure lubricants and conditioners. Drumdial designed this product specifically for drums. Research, development and product testing over many years, have produced the best bearing edge conditioner available.

Drumdial Bearing Edge Conditioner will not harm wood, plastics or metal.